HCL/主板

本文处于需要翻译的文章的状态，欢迎您积极参与翻译与修订。 翻译人员：无，修订人员：无。

Nano-ITX

厂商	型号	处理器 厂商	芯片组	默认支持 的核心	SUSE发行版本			64位支持	注释
					10.1	10.2	10.3
VIA	EPIA N-Series	VIA	VIA VT8237R 南桥 VIA Luke CoreFusion™ 处理器/北桥						目前没有信息,如果你有,请提交到这里.

Micro-ITX

Vendor	Model	Processor Vendor	Chipset	Supports default Kernel	SUSE Release			64bit Supported	Comments
					10.1	10.2	10.3
Aopen	i945GTt-VFA	Intel	Mobile Intel® 945GM Express Chipset						Supports Core Duo - Yonah

ITX

Vendor	Model	Processor Vendor	Chipset	Supports default Kernel	SUSE Release			64bit Supported	Comments
					10.1	10.2	10.3
VIA	EPIA SN-Series	VIA	VIA VT8251 South Bridge VIA CN896 North Bridge						Installation Ok for 10.3, video, dual LAN, USB, CF drive, audio

Micro-ATX

Vendor	Model	Processor Vendor	Chipset	Supports default Kernel	SUSE Release			64bit Supported	Comments
					10.1	10.2	10.3
ASROCK	K7S41GX	AMD	SiS 963L
Abit	IP-95[1]	Celeron D	VIA® P4M890						Im not using onboard graphics-Nvidia/PNY 7300gs graphics
Intel	D201GLY	Intel (comes with integrated Celeron CPU)	SIS662						The SiS662 - Mirage*1 graphic card has problems. It gives a distorted image at resolutions > 1024*768. Try using the Xorg VESA driver
Intel	DG33TL	Intel Pentium Dual Core E2140	Intel G33 Express Chipset						ACPI issue stopped install from running (blank screen after kernel loaded), turning off ACPI allowed install to run but with only one core detected. Adding pci=nommconf to the kernel boot string instead of disabling ACPI allowed install to proceed with both cores detected. You might need to flash the bios, Intel provides an OS independent update that you can burn to a CD. After that, installation went smoothly, openSUSE detected everything, all components work.

Mini-ATX

Vendor	Model	Processor Vendor	Chipset	Supports default Kernel	SUSE Release			64bit Supported	Comments
					10.1	10.2	10.3
ASUS	P5SD2-X	Intel	SIS656 chipset						SATA drive not detected (but works if you use only PATA drive)
ASUS	P5VD2-MX	Intel	VIA P4M890
ASUS	M2A-VM	AMD	AMD 690G Chipset						OpenSUSE 10.3 installation works great after disabling HPET-Timer in BIOS which is only useful for Windows Vista. Configuration: AMD Athlon 64X2 4800+ AM2 socket, SATA Disk and DVD.
ASUS	MNPV-VM	AMD sk AM2	nForce NF430 Chipset						OK, use Yast to set audio chipset AD1986a: position-fix=1; model=3stack [4600x2 64 2Gb DDRII 800Mhz 4xHDD 250Gb SATA Raid5] Installed everything out of the box - Above Audio chipset Not available in 10.3>>Installs MCP51 High Definition Audio. Using Ver10.3 64bit>>System AM2 6000+ 2GB DDR2 500GB SATA HDD
VIA	EPIA SP-Series	VIA	CN400 North Bridge VT8237 South Bridge						Please read this: DMA & VT8235 Lock-up Disable CPU frequency management (powersave options)!

ATX

Vendor	Model	Processor Vendor	Chipset	Supports default Kernel	SUSE Release			64bit Sup- ported	Comments
					10.1	10.2	10.3
Albatron	KX400+PRO-C	AMD	VIA KT333						All components work on default install.
Intel®	D955XBK	Intel	Intel® 955X Express Chipset						All components work on default install.
Abit	IP35-e	Intel	Intel® P35						Installing from CD doesn't work because of the JMicron PATA controller which is cannot be set to AHCI in the BIOS as suggested here: SDB:CD not found problem. I fixed it by copying the installation files to a USB disk and installing from there
Abit	KN8-SLi	AMD	nVidia nForce 4-SLi
Asrock	4CoreDual-SATA2	Intel	VIA PT880 Pro/Ultra Northbridge, VIA8237S Southbridge						Sata Controller Module Compatibility Problems with default installation, must use IDE/PATA Controller. Sound Card Module not working with default installation (with VIA 82x modules)
Asrock	K7VT4A PRO	Athlon/Sempron	VIA KT400A Northbridge, VIA8237 Southbridge						Also SUSE-10.0.
ASUS	A7N8X Deluxe	NVidia	nForce NF2 Chipset						OK! (Also worked ok on SuSE-9.2 and 9.3)
ASUS	A8V deluxe	VIA	VIA K8T800 Pro Chipset						All components work on 64 bit default install (no ASUS drivers needed)
ASUS	A8N5X	NVidia	nForce NF4 Chipset						OK!! on 64 bit def. install (no ASUS or ext. drv for mobo) [3700+/2x1Gb,DDR400,King./WD CaviarSE,80GB,IDE/NVidia6200,PCIex]
ASUS	K8V SE Deluxe	VIA	VIA K8T800 Pro Chipset						All components work flawlessly.
ASUS	M2N-SLI Deluxe	AMD	nForce NF570 SLI Chipset						Suse found everything. Right chipset etc. / Huge problems: No installation media found during install (no IDE support), had to load modules manually. Neither sound nor NIC worked (pre-10.3). For openSUSE-10.3, BIOS needs to be updated to version 1302. older M2Ns shipped with BIOS version 0307 will only install in safe mode on openSUSE-10.3. nVidia GeForce 7950GX2 video card needs to be configured and works on 10.3 with one-click-install. NIC works on openSUSE-10.3 with updated BIOS.
ASUS	M2N4-SLI	AMD	nForce NF500 SLI Chipset						openSUSE detected everything during installation. Ethernet had to be set to DHCP in the first instance. System used only IDE-based drives (will test SATA soon). Also used a PCI sound card. (For me both sata and ide drives present and working fine, needed to use sata dvd drive for install, using 64bit.
ASUS	P4V800-X	Intel P4 (HT) socket 478	VIA PT800						Everthing works without a glitch, no drivers needed. It is recommended to update your BIOS to version 1008. Warning, use afudos v2.07 (or later) or ASUS update v5.21 (or later) to update 1008 bios. DO NOT use Ezflash to update 1008 BIOS!! You will destroy the BIOS and will end up with a dead pc! If this happens to you, you can buy a new programmed BIOS-chip here: http://www.flashbios.org
ASUS	P5B-E	Intel Core™2	Intel P965 chipset						Problem. JMicron JMB363 (PATA-SATA) controller. Please read this: SDB:CD not found problem
ASUS	P5B-VM	Intel Core™2	Intel P965 chipset						Problem. JMicron JMB363 (PATA-SATA) controller. Please read this: SDB:CD not found problem. On board video some support - trying to track down drivers. Problem also with SATA when memory is 4Gb : data corruption on disk, even with last bios (901). No network support before suse 10.2. Hardware raid can only be use with PATA + SATA ; no SATA-SATA raid... Soft Raid works perfectly.
ASUS	P5K	Intel, Socket 775	P35/ICH9 Chipset						Runs out of the box, the installation found everything. 64bit 10.3 Install runs out of the box too.
ASUS	P5KR	Intel, Socket 775	P35/ICH9 Chipset						SuSE 10.3: PATA Jmicron Driver not working with original kernel. Kernel update to 2.6.22.13-0.3 or later is required to use the Jmicron PATA. BIOS: SATA-DVD drive only recognized if SATA is set to compatible mode. Jmicron must be set to AHCI (IDE oder RAID not working).
ASUS	P5LD2 Deluxe	Intel	Intel 945 chipset						Suse found everything. Right chipset etc.
ASUS	P5LD2-V	Intel	Intel® 945G Express Chipset
ASUS	P5N-E SLI	Intel - socket LGA 775	NVidia Nforce® 650i SLI Chipset						Everything worked on default install - including sound, ethernet, Jmicron Raid, after BIOS flash to version 0401. 4Gb ready. Carefull, when delivered with bios 0401, the upgrade to later bios needs the dos tools : EZ Bios reject BIN files. With next versions (0505/0608) - OK.
ASUS	P5WD2	Intel	Intel® 955X Chipset						All components work on 64 bit default install (no ASUS drivers needed)
BIOSTAR	[2]	AMD	AMD GeForce 6100 M9 SLI Ready						All components work on 32 and 64 bit flawless, for the integrated video card is best to install drivers manually, the card has awesome factory setups but even better if overclocked, pretty convenient for people that want to set up a budgeted custom PC.
EPoX	EP-8K7A	AMD	AMD IGD4 AGPset (AMD 761 + VIA VT82C686B)						OK. (Also SuSE-9.3 and 10.0)
Gigabyte	GA-6VTXE-A	Intel Pentium III	VIA 694T						Installed on SuSE 9.2, no problems at all (working usb ports and sound).
Gigabyte	GA-8IPE1000-G	Intel Pentium 4 (HT)	Intel 865PE						All hardware is working properly. Excellent compatibility.
Gigabyte	GA-8S648FX-L	Intel Pentium IV (HT)	SIS648FX						All hardware is working properly under Opensuse 10.2. Excellent compatibility.
Gigabyte	GA-P35-DS3R	Intel	Intel P35						Under Opensuse 10.3 the module R8169 is incompatible with the NIC (RTL8168b/RTL8111b) and must be updated to Realtek's latest release (follow instructions in README) http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false The sound device Realtek ALC889A works natively with ALSA but not with OSS.
Gigabyte	GA-7N400	AMD Athlon/AthlonXP/AthlonMP	nVidia nForce2						All hardware is working properly under openSUSE 10.2. Excellent compatibility.
MSI	K7T266 Pro	AMD	VIA VT8366 & VIA VT8233						Nice and fast, sound-out works, mic/lin-in not tested.
MSI	KT3 Ultra	AMD	VIA KT333 & VT8235						OK. (Also SuSE-9.3).
MSI	K8N Neo4/SLI Platinum	AMD	nVIDIA® nForce4						Nice and fast, sound-out works, mic/lin-in not tested. Works with two SATAs in RAID 1 configuration. Does not work with SATA in RAID 0 configuration (untested as SATAs in non-RAID config.).
MSI	K8T NEO2-F v2.0	AMD	VIA KT800 PRO						Nice and fast, Sound untested.
MSI	P35 Neo	Intel Core™2	Intel P35 chipset						All components work on default install.
SuperMicro	PDSGE	Intel Pentium D	Intel® 955X (Glenwood)						SuSE installed default kernel (smp).
Tyan	Tomcat K8E	AMD	nVIDIA® nForce4						Built in multimedia and Network find
GIGABYTE	GA-K8N51GMF-RH	AMD Athlon 64 3000+	nVidia GeForce 6100 nForce 410						openSUSE 10.1 & 10.2 Everything on Main Board is discovered and configured during installation, including NVIDIA Raid 0,1. Better to download the NVIDIA graphics card drivers. Read here NVIDIA to add the repository, which is the easiest way to install the drivers.

BTX

Template:HCLlegend

Vendor	Model	Processor Vendor	Chipset	Supports default Kernel	SUSE Release			64bit Sup- ported	Comments
					10.1	10.2	10.3
Intel®	[3]	Intel Pentium D 940 3.2	Intel® 955X Express Chipset						All components work on default install.Up graded to XFX 8800gts Graphics card,no onboard graphics.