HCL/笔记本/HP

'难道没人用本本装这个系统试试吗？？ 我原以为会得到很多有用的信息，现在是失望夹杂着痛苦！ 求求各位大鸟帮帮忙帖一个对照表，英文那个不太清楚而且什么语种都有Yisou头疼！！！'

兼容硬件列表 - 笔记本主页 Acer（宏基） - Apple（苹果） - Asus（华硕） - Compaq（康柏） - Dell（戴尔） - Fujitsu（富士通） - Hitachi（日立） - HP（惠普） - lenovo（联想）-IBM - Mitsubishi（三菱） - NEC - Panasonic（松下） - Samsung（三星） - Sony（索尼） - Toshiba（东芝） - 其它

}

Model	SUSE Linux / openSUSE Release	Hardware Support							Remark:
		Video	Sound	Ethernet	Wireless	Bluetooth	Power Management	Other
Pavilion ze2308wm	9.3				with ndiswrapper 1.7 and broadcom driver			Touchpad work both vertical and horizontal scroll	1024x768 24 bit 3D, almost flawless install touchpady a little to touchy though
Pavilion ze4300	9.3							works with IBM Touchpad support (scrolling)	Supports 1440x1050 screen resolution. Does not support notebook capability of second monitor (as far as I know).
Pavilion ze4547wm	10.2				Not Integrated		Suspend Doesn't Work, Hibernate Does Work & CPU Frequency Throttling Requires Manual Kernel Update and Setup	Synaptics Touchpad Driver Automatically Loaded	Madwifi works well with my PCMCIA Wireless Adapter. Volume Up & Down Work, but Mute button doesn't work.
Pavilion zv5120us	9.3						Suspend and hibernate not working, black screen...	touchpad works	Supports 1240x800 screen resolution; hotkeys: sound and www buttons work with existing pavilion keyboard layout; modem seen but not working (google -zv5120us linux- for some help).
Pavilion dv1125la	9.2	with 3D			Needs updated firmware			touchpad works	Supports 1920x1200 screen resolution (wide screen display only 1024x768 24 bit 3D); hotkeys: sound buttons work; modem works; usb works; Digital Media (card reader): SD.MS/Pro.MMC.SM.XD not work; DVD/RW works.
Pavilion zv6000 AMD 3200+	9.3 64bits, 10.0 64bit, 10.1 64bit				w/SUSE ndiswrapper and Broadcom 64bit drivers			touch pad works	There is a clock problem from the motherboard, there are ways around fixing this and there is extensive documentation on forums around.(9.3)- Clock problem solved with 10.0. Ndiswrapper 1.27 works on 10.1 only with the netbc564.inf (driver from Ubuntu forums) NOT the bcmwl5.inf file. The ATI 64bit drivers for the 200M cards seem to not work so far for 3d (9.3 or 10.0 or 10.1)
Pavilion zv6270us	10.0 64bit Retail							Touch Pad , Modem , Card Reader .	No 3D (2006-01-25)
nx5000	10.0RC1				After firmware install		Suspend to Disk ok, Suspend to RAM not reliable.	touch pad ok, infrared ?,SD no, Modem ?	.
nx9030	10.0, 10.1						Suspend to Disk ok	touch pad ok, infrared working	Modem working with HSF modem driver, however modem not working with common driver. Wireless working well. Acrox 8d mouse is not working well with full functions fwd-back buttons, 3d ball not working.
nx7010	10.1				After firmware install		Suspend to Disk ok, Suspend to RAM needs boot parameter "acpi_sleep=s3_bios".	touch pad ok, infrared ?,SD ?, Firewire ?, Modem ?	Radeon Mobility 9200 Card now recognized automatically. Dualhead works out-of-the-box.
Pavilion zd8000	10.0 Retail				See Remark			Touchpad works as well as modem	Radeon Mobility X600 works beautifully (Dualhead as well). External pcmcia wireless card, Linksys WPC55AG works flawlessly
tc4200	10.0 Retail				After firmware install		Suspend to Disk fails, Suspend to RAM fails, more info	Touchpad ok, Bluetooth ok, modem?, irda?, SD?	SuSE 10.0 is not working out of the box, more info.
nx8220, PY515EA	10.0 Retail						After instaling kernel, and setting "reboot=bios" in GRUB.	Touchpad ok, Bluetooth?, modem?, irda?, SD?	Flawless install, if not considerig problems with original kernel.
nc8230, PV406	9.3 Retail	(with ATI Binary Driver)					(see notes; suspend to ram fails)	Touchpad & Trackpoint ok, modem?, irda?, SD?	ATI Binary Driver (> 25.18) is required for OpenGL hardware acceleration, Suspend to Disk, DualHead or Xinerama. An annoying high-pitched noise produced by faulty electronics can be eliminated by adding "options processor max_cstate=2" to /etc/modprobe.conf (affects a whole series of intel chipsets with integrated bluetooth). Touchpad (including horizontal scrolling), Bluetooth and Wireless worked out of the box (maybe after Yast-Update). Installing 10.0 failed due to common ACPI problems (known and fixed in 10.1 AFAIK).
nx8220, PY538ES	10.2 DVD	3D with radeon driver, also with new fglrx 8.32 (better performance)						Touchpad works,card reader works with little configuration	Screen Resolution 1280x800 automatically configured after install, sound buttons work,hibernation ok.
nc6000	10.0,10.1						Suspend to disk works, suspend to RAM works on 10.1	Touchpad ok, modem?, irda?, Sound ok, wifi ok (more info)	suspend to ram works in 10.1 but not in 10.0.
nc6220	10.1,10.2						10.1:Suspend to disk works, but fails to come back with XGL	Volume keys only work from 10.2, Use snd-intel8x0m + slmodemd for the modem, need smlink package from non-oss repo|
nc6400	10.1	http://www.suse.de/~sndirsch/ati-installer-HOWTO.html					Suspend to disk works, suspend to RAM works on	Touchpad ok, modem?, irda ok, Sound ok, wifi ok, Biometric Fingerprint Sensor not working, Integrated Smart Card Reader Not Working, TPM 1.2 Embedded Security Chip Not Working.	ATI X1300 display in Suse 10.1 show only 128MB but Windows Xp show 512MB. Do not know why but so far working great. KDE KPowersave ( Set Brightness Not Supported - IBM work great in this area )
nx6110	10.0RC1						Suspend to disk works, as does suspend to RAM	Touchpad ok, modem?, irda?, Sound ok	Flawless install.Laptop halts instead of shutdown or reboot after Linux has shutdown. Probable solution, install kernel. It should be fixed any way in next kernel update.
nx6125	10.0, 10.1							finger print reader won't work	No real problems except the usual ATi related issues.
nx6325	10.3 Alpha 3	without 3D. Did not try latest ATI drivers			with ndiswrapper and bcmwl5.inf driver			finger print reader doesn't work	Kernel 2.6.21-rc5 fixes ACPI and DSDT problems. Fans working now. TZ1,TZ2,TZ3 sensors working. 'Bad state' on shutdown solved. Suffers from the 'Radeon Annoying bug' so no init 5 after install. After fixing xorg.conf - Workaround: Disable the MergedFB option - init 5 works fine. Runs very stable for an 'Alpha' version.
nx9000	10.0						Suspend to disk works, suspend to RAM not	Touchpad ok, modem ok, irda ok, Sound ok	Flawless install. Broadcom Wireless mini-PCI only works with ndiswrapper 1.7 and broadcom driver
nx9005	10.0,10.1	without 3D					Suspend to disk works,but the network doesn't work after wake up	Touchpad ok, modem ok, Sound ok	Everything works out of the box
Pavilion dv6005ea	10.2 DVD 32 bit				with ndiswrapper				1280x800 24 bit 3D, with NVIDIA propriatary driver. Very buggy unless you boot with "iommu=off noirqdebug"
Pavilion dv8025EA	10.0 DVD Retail - 32 Bit	working, with ATI drivers*			**		haven't tested	Sometimes doesn't power off/reboot automatically (need to hold the power button for 4 seconds) Inbuilt memory card reader doesn't work I haven't tried dual head, TV out, PCMCIA, the new PCMIA style slot or modem Converting a CD to OGG in KDE cause the pointer to go crazy if you touch the track pad, works fine afterward (must be an IDE problem).	IMPORTANT - requires acpi=noirq to install and boot. * Proprietary ATI drivers require you to share 128MB of system RAM with the graphics card (freezes or loads default unaccellerated drivers otherwise). ** I couldn't get the wireless working with NDISWrapper in 64-bit even with latest NDISWrapper and 64-Bit XP drivers. I suspect the 64-bit XP drivers were not suitable
Pavilion zt3000	9.2, 9.3, 10.0, 10.1beta2						update 18 JUNE 2006 - Suspend to disk and RAM works- add parameter: acpi_sleep=s3_bios to kernel boot line- vesafb and vga16 should both work fine - important to disable radeonfb	Touchpad ok, modem ok, irda, Sound ok. Winbond W83L518D SD/MMC card reader works with wbsd and mmc_block kernel modules loaded. ATI Radeon 9200 3D works with fglrx.	No problems with install. Can't successfully drive a projector/beamer.
Pavilion DV8040US	10.0 Retail DVD	Working, with ATI drivers			Ndiswrapper .tar "stable" w/ Windows 64bit driver		Working - sus to disk & RAM not tested	Touchpad-tapping & scrolling works, modem not tested, , Sound ok.	No problems with install. Must use boot options - "acpi=force noapic noirq" at boot prompt during install "F3". Also add to Grub using Yast.
Pavilion dv8000z	10.0 Retail DVD, 64-bit				Built-in Broadcom card not detected, but Linksys WPC55AG cardbus worked out of the box.	The Broadcom card wasn't detected for wireless, so I assume that its Bluetooth functions don't work either, but I haven't tried.	suspend to disk suspend to RAM not tested	Touchpad works, but for some reason neither YAST nor KDE is able to disable it even when you tell them to (I hate touchpads). Fortunately I was able to tape some cardboard over it to effectively disable it. Of course, if you like touchpads, then there's no problem.	Important: If you're doing the 64-bit installtion you must add the boot option "noapic" or the video won't work (use F3 at the install prompt). 32-bit doesn't seem to need the extra boot option. Other than that, the install went perfectly. If you want the wireless to work, I'd recommend the Linksys WPC55AG wireless card since that worked for me, but if want a different card, make sure that you check compatability before you buy one (http://linux-wless.passys.nl/ is a good site), particularly if you're running in 64-bit mode. You're pretty much going to want a card that works with the kernel since it's difficult to get 64-bit Windows drivers for ndiswrapper to use.
HP Pavilion dv1000	10.1 Open SUSE, 32-bit				haven't had a chance to fully test; powerbutton worked to shutown machine			Easy install with no problems	14.1 inch LCD auto detected nicely
HP Pavilion dv1740br	10.2 Open SUSE	with XGL			later with ndiswrapper		the hibernate shutdown last time I used, need more test	Easy install, only the problem with the Wireless that I'd already knew. The ndiswrapper content at the Support area on this site solved completely. Not tested Yeat: MODEM and Cards || 14.1 inch wide LCD auto detected nicely
HP Pavilion zd7010ea	Suse 9.3, 10.0	3D is working with new nvidia driver						Keyboard (ms natural pro) USB DVD-RW+ Touchpad card-reader	More or less standard install, only some small adjustments are necessary (NVIDIA). Graphics resolution 1440x900 on flat panel , analog monitor . Suspend to disk . Detection of closing the notebook . Keyboard volume control
HP Pavilion ze4925ea	9.3, 10.0, 10.1				PCMCIA card works with ndiswrapper and Broadcom drivers.			Touchpad works	Some multimedia/special keys do not work.
Pavilion dv5255ea	10.1							Touchpad works
Pavilion zv5000z	10.1, 64-bit				reverse engineered bcm43xx driver		hibernate suspend	touchpad 5in1 card reader	nv - 1280x960 nvidia - 1680x1050
Pavilion dv2120us	10.1, 64-bit				See remarks		suspend	touchpad card reader	Wireless: Installed ndiswrapper off SuSE 10.1 installation DVD; Downloaded sp33575.exe from Software & Driver downloads HP Pavilion dv2120us Notebook PC site; Ran sp33575.exe to extract files; Copied directory that contains bcmwl5.inf file to SuSE; Followed the installation instructions on the ndiswrapper wiki.
Pavilion ze4600	10.1				with ndiswrapper 1.7 and broadcom driver on CD supplied with laptop (BCM4320)		Only tried on/off and suspend	works with IBM Touchpad support (scrolling)	Supports 1440x1050 screen resolution. Haven't tried getting the hotkeys to work.
Pavilion dv9000	10.2, 64-bit								tried to install version 10.2, but after preparation of the installation, the hdd cant be found. So no installation possible atm.
Pavilion dv9000ea	10.2, 64-bit								some ACPI problems (e.g. system crash when setting the hardware clock, no access to the secondary hdd) that can be avoided by adding "acpi=bios" to the boot options.
Pavilion dv9053ea	10.2, 64-bit								system freezes when setting the hardware clock:solution boot with apm=off, acpi=off noapic then change in /etc/sysconfig/System/environment/clock/SYSTOHC=NO and reboot normally.
Pavilion dv9033cl	10.2 Retail DVD, 64-bit	without 3d *(see notes to enable 3d)			* see notes				Big improvement over 10.1! Installation was a piece of cake and MUCH faster. This system was purchased new in October 2006. has had 10.1 on it as well. Has dual 100 gb SATA hard drives. nVidia GeForce Go 7600, and Centrino Duo ICH7 audio, etc. Will report more as finish tweaks and updates. Just installed 10.2 on this system on 2007-01-04. Audio workds but not able to control between headphones and speakers, will likely have to do as in 10.1 from the following (link coming soon):... Wireless works initially under Network Manager, but starts to become "flaky" under load when using WEP. Need to use updated ipw3945 and ieee80211 (http://ipw3945.sourceforge.net/#downloads)‌. May have to disable NM and only run under ifup/down (testing still). WEP still doesn't work reliably under 10.1 or 10.2 with Network Manager nor with ifup/down until update ipw & ieee. Video 3d - have to download nVidia drivers for 3d from http://www.nvidia.com/object/unix.html - DO NOT enable Xgl before installing the nVidia driver, system will be so slow as to be unusable. DVD-DL-Lightscribe (report coming soon). TV-Tuner card (report coming soon). Built-in webcam (report coming). Hotkeys & Fn Keys (works! when hotkeys in sysconfig enabled). IR Remote (report coming). Modem (report coming). Memcard slot (report coming). HDMI (report coming). Expansion slot (n/a yet). Touchpad vertical scroll works, no horizontal scroll (yet). Microphone (report coming).
Pavilion dv2000t (P/N RM668AV)	10.2, 64-bit, DVD, KDE	3D work after install last nvidia driver from website. Do not work with drivers from YAST repository.	The Work with QuickButtons. Do not work with QuickPlay						Touchpad work both vertical and horizontal scroll. Webcam is detect and work usind v4l, uvcvideo and kdetv. Mic and Phone NA. Another itens tests next week.
Pavilion dv6186ea	10.2, 64-bit, DVD	working with new nvidia driver						Touchpad Wireless modem card reader webcam	1280x800, Flawless installation, still have to check all those .
HP nx7400	10.2	with 3D					Suspend to Disk Suspend to RAM	Touchpad Modem Hot Keys With "hotkey-setup" package	Broadcom wireless card works, but only with ndiswrapper. This laptop (as many other HP laptops in this page) suffers from "bad state" problem. Laptop goes into "bad state" whenever it is shutdown or rebooted from SUSE. Possible indicators of the problem are: CPU not reaching maximum frequency (speedstepping does not work), battery indicator is not updated when running under battery power, long delay (20s) when booting. This problem survives reboot. One workarround is to remove power and battery, and wait for up to 20 seconds. The solution is to use kernel from ftp://ftp.suse.com/pub/people/trenn/hp_fixes_final/ or to recompile kernel (configure psmouse as module, unload the driver before system shutdown or reboot). This bug is appearantly fixed in the latest kernel, and might get into openSUSE 10.3. It is also important to use the latest BIOS version from HP. Suspend to RAM kind of works, but is not enabled by default. You should edit /etc/pm/config to force use of s2ram (change line S2RAM_OPTS="" to S2RAM_OPTS="-f"). On resume display backlight is off, but can be turned on using Fn+Brightness button. Ethernet works after resume, power management (fan) works as well. I did not check whether wireless survives resume. Initially I had some problems with audio (only headphones were working), after playing with KMixer speakers are working as well.
HP nc8430	10.2	with 3D and XGL and compiz/beryl					Suspend to Disk Suspend to RAM	Touchpad Modem Hot Keys (some of them most of the time ;-)	This laptop (as many other HP laptops in this page) suffers from "bad state" problem. Laptop goes into "bad state" whenever it is shutdown or rebooted from SUSE. Possible indicators of the problem are: CPU not reaching maximum frequency (speedstepping does not work), battery indicator is not updated when running under battery power, long delay (20s) when booting. This problem survives reboot. One workarround is to boot to Windows or to remove power and battery, and wait for up to 20 seconds. The solution is to use kernel from http://repos.opensuse.org/Kernel:/SL102_BRANCH/openSUSE_10.2/ or latest online-update-kernel. see https://bugzilla.novell.com/show_bug.cgi?id=179702 This bug is fixed in the latest kernel, and might get into openSUSE 10.3. It is also important to use the latest BIOS version from HP. to get wlan, fglrx or any other kmp-drivers to work again after kernel-update, just get source-rpm of required kmp-package and rebuild rpm or reinstall driver (in case of fglrx). For 3D graphics problem fixes look at: http://en.opensuse.org/ATI_Driver http://en.opensuse.org/Howto/ATI_Driver https://bugzilla.novell.com/show_bug.cgi?id=222993 https://bugzilla.novell.com/show_bug.cgi?id=233112 http://forum.beryl-project.org/viewtopic.php?f=43&t=13&start=210
HP dv8295	10.2 DVD 32bit	(had probs with 10.1 and earlier)	although seems quiet					Some hot keys Quick-Play keys	Haven't tested this machine extensively yet, but have been running 10.2/KDE as main system for about 6 weeks, and haven't run into **any** problems at all (not even a crash!)
HP dv8284	10.2 DVD 32bit	3D/Xgl/beryl - drivers need install	although Microphone NOT working				NO suspend at all	AND the telecontrol Quick-Play keys 5in1 card reader	Battery lasts 3h-6h while in Microsoft Windows keeps for maximum 2h with the same minimum use. Sometimes doesn't shutdown, sometimes does not boot. In general its working 90% fine
HP Pavilion dv1000	10.1 DVD 32-bit						Suspend to RAM causes system to crash, Suspend to Disk is OK, but might boot back into QuickPlay	Media Card Reader Networking and Audio	Recognized Everything out of the box, required no configuration.
HP Pavilion dv1000	10.0 DVD 32-bit						Nothing Works	No hardware recognized, not even USB	No hardware was recognized at all, all that it recognized was DVD burner, but no USB, Audio, etc.